Haus S, Conversion

This private residence was revisioned to embrace the surrounding woods and tranquil hillside location while also offering city views of Stuttgart from a new upper floor. In place of a double-pitched roof, a simple yet structured, open-plan floor is realized atop the house, a building from the 1930s, which had been previously refurbished in 1990. The architectural idea was to place a deliberately unobtrusive structure upon the existing building. The second floor addition stands in contrast to the massive lower level without dominating it, creating a focal point for the house via massive glazing and without disturbing views of the surrounding landscape.

The structure’s cantilevers on the south and west sides of the house place emphasis on the new addition and function as dividing elements between the existing structure and new roof system. Simultaneously, they function as canopies, creating covered areas for the garden. The position of the new volume – the “glazed box” – is a response to building regulations and a solution to differentiate each garden on the sides of the building, orienting them toward the sun and views. The location and organization of programming for the two lower floors – the entry level and a lower level, below – are kept unchanged.

The top floor has its own organization. The approximately 150m² open-plan space is zoned by “boxes” – the intimate private rooms used as a dressing room and bathrooms. A large sliding door divides the upper floor from the master suite and the guest areas with a lounge, inner stairs, a library, and a home office. An outside staircase, placed on a partly demolished oriel, leads up to the top of the new flat roof, where a new terrace is created from timber flooring. The result is a generous residential level that responds to the hillside and provides views of the city.

In contrast to the glazed, geometric facade, the interior finishes create an inviting, relaxed atmosphere. The floor and walls of the private rooms are clad in walnut panels, evoking a quiet warmth with unobstructed surfaces that hide doors, cabinetry, and a built-in entertainment system. The existing inner staircase was newly finished with walnut treads and a new glass railing. Upon entering the bathrooms, the atmosphere changes. Walls are dark and simple, and bursts of color in the furniture, cabinets, and fixtures are set as counterpoints. The dressing room is also different: white wooden cladding on the walls and moveable wooden shutters along the façade create a distinct character. The dimmable LED lighting system was designed with recessed, moveable spotlights, and additional lighting can be added when needed.

The load bearing capacity of the home’s foundation and walls was unknown. Therefore, prefabricated laminate timber was used as a lightweight solution to construct the new top floor, creating an additional weightload that only marginally exceeds that of the home’s former roof structure. Floor to ceiling windows in wood framing shape the light throughout the upper floor, providing panoramic views and a sense of transparency. Exterior metal mesh roller shutters offer a filtered view of the surrounding landscape while protecting interiors from solar overheating.

Radiant panels line both ceiling and floor and serve to regulate the home´s interior climate by cooling it in summer and heating it in winter. Radiant heating and cooling systems are further enhanced by deep probe geothermal drilling (3m x 90m), and the installation of a heat pump and solar thermal panels on the roof. The home’s existing gas heater acts as a back-up system. In terms of overall energy efficiency, the new structure is composed of highly energy efficient materials while the windows and insulation on the existing part of the home was not altered.

Client
private

Planners
Structural engineer: Knippers Helbig GmbH, Stuttgart
Energy concept: Transsolar Energietechnik GmbH, Stuttgart
Electrical planning: Erding Solar GmbH, Erding
Building physics: Bobran Ingenieure, Stuttgart
Survey: Vermessungsbüro Hils+Hils, Stuttgart

Manufacturers/Products
Sunblind: GKD Gebrüder Kufferath AG, Düren
Occhio built-in lights
Nimbus Group outdoor lights
Ardex Pandomo flooring bathrooms T4 systems heating and cooling ceiling system Viega floor heating system Sanikal
Antonio Lupi: sanitary ware and bathroom
furniture partly Vola A/S fittings
Reiling-Group recycling glass granulates
Frescolori bathroom wall finish
MM Kaufmann prefabricated glued laminated timber construction
Steico fibreboards

Characteristics
Planning and completion: 2012-2014
Volume: 765 m³ / 27,000 cu.ft.
Gross area: 185 m² / 1,430 sq.ft.
Net floor area: 133 m² / 1,430 sq.ft.

Planners
Structural engineer: Knippers Helbig GmbH, Stuttgart
Energy concept: Transsolar Energietechnik GmbH, Stuttgart
Electrical planning: Erding Solar GmbH, Erding
Building physics: Bobran Ingenieure, Stuttgart
Survey: Vermessungsbüro Hils+Hils, Stuttgart

Manufacturers/Products
Sunblind: GKD Gebrüder Kufferath AG, Düren
Occhio built-in lights
Nimbus Group outdoor lights
Ardex Pandomo flooring bathrooms
T4 systems heating and cooling ceiling system
Viega floor heating system
Sanikal – Antonio Lupi sanitary ware and bathroom furniture partly
Vola A/S fittings
Reiling-Group recycling glass granulates
Frescolori bathroom wall finish
MM Kaufmann prefabricated glued laminated timber construction
Steico fibreboards

Characteristics
Planning and completion: 2012-2014
Volume: 765 m³ / 27,000 cu.ft.
Gross area: 185 m² / 1,430 sq.ft.
Net floor area: 133 m² / 1,430 sq.ft.